Mono Channel, 1000 W x 1, S/N Ratio: 95 dB, THD at Rated RMS Power: 0.05%
The Jl Audio 1000/1 has 1 Equalizer Bands. Signal to Noise Ratio: 95 Decibels.

Dual Channel, 1650 W x 2, S/N Ratio: 90 dB, THD at Rated RMS Power: 0.04%
The Lanzar VIBE286 has 2 Equalizer Bands. Signal to Noise Ratio: 90 Decibels. At Lanzar we Developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye catching cosmetics, all come together in "Street Team" by Lanzar.

Dual Channel, 250 W x 2, S/N Ratio: 100 dB
The Sony XM-2002GTR has 2 Equalizer Bands. Signal to Noise Ratio: 100 Decibels.

Dual Channel, 70 W x 2, S/N Ratio: 100 dB
This Audiobahn amplifier has the power to fill your car with ground-shaking bass. MOSFET circuitry runs cooler and more efficiently for better power delivery. Four-way protection circuitry helps guard against damage when youve got it cranked up.

Dual Channel, 250 W x 2
The innovative circuit design, MOSFET output stages, and proprietary technology inside the Punch P5002 will bring out extraordinary detail in your music, with ultra-clean power you just can't get from a lesser amp. You get 125 watts RMS per channel in stereo mode (plenty for a set of power-hungry component speakers, or a couple of subwoofers), or bridge the P5002 for an enormous 500 watts RMS.

Mono Channel, 500 W x 1, S/N Ratio: 100 dB, THD at Rated RMS Power: 0.05%
Turn your vehicle into a bass machine with this Audiobahn mono-channel amplifier. It pumps out 500 watts of power at 2 Ohms. Take it down to 1 Ohm and get up to 1600 watts of peak power.

Mono Channel, 800 W x 1, S/N Ratio: 57 dB, THD at Rated RMS Power: 1%
. All HCCA series amps feature a variable low-pass crossover, INTELLiQ bass optimization, high efficiency Class D circuitry, massive MOSFET power supply, remote gain capability...blah, blah, blah...POWER!

Mono Channel, 300 W x 1, S/N Ratio: 95 dB, THD at Rated RMS Power: 1%
KICKER amplifiers have always ruled the winner's circle at car audio competitions because they combine remarkably advanced design with the highest-grade electronic components for the ultimate combination of sound quality and brute power. Beneath the exciting new ZX series exterior lies internals that have been designed from the ground up to deliver tight, clean power. An unregulated Class A/B power supply allows the amplifier to really pour on the power in 2-ohm operation. All this power is at your command with a built-in crossover, high- and low-level inputs, and subsonic filter to help protect your subs. Fast-acting protection circuitry guards against short-circuits, over-voltage, overheating, or wiring mishaps.

Mono Channel, 750 W x 1, S/N Ratio: 95 dB
Provides massive power to your subwoofer without drawing lots of power from your system. 375 watts RMS at 4 ohms or 750 watts of peak power at 2 ohms. Protects against short circuits, overloads, heat and reverse polarity. Speaker-level and RCA inputs make it easy to add on to your system.

Dual Channel, 1650 W x 2, S/N Ratio: 90 dB, THD at Rated RMS Power: 0.04%
The Lanzar MXA282 has 2 Equalizer Bands. Signal to Noise Ratio: 90 Decibels. At Lanzar we Developed a line of products that suit the needs of both the professional competitor and the street competitor. Cutting edge design and manufacturing, eye catching cosmetics, all come together in "Street Team" by Lanzar.